Wednesday, June 21, 2017

What is Delamination? and How Do I Prevent it?

DELAMINATION!??

What is PUL?

PUL, or Polyurethane Laminate, is the water proof outer layer on most modern cloth diapers. PUL is Water-proof, flexible and durable. It is created by bonding a plastic layer to the fabric you see as the outer part of your cloth diaper.

What Exactly is Delaminaion and Why Does it Occur?

Delamination is when the waterproof laminate begins to pull away from the fabric. Cloth diapers are washed and worn MANY times, and, just like regular clothing, over time it is normal for cloth diapers parts to deteriorate, including PUL. Having a large stash is the #1 way to combat wear and tear on your diapers, its the difference of washing daily compared to a couple times a week. (you wouldn't was a shirt daily and expect it to hold up) Washing or drying in high heat are also common causes of delamination. SoftBums recommends washing in temperatures no higher then 140 degrees and to avoid the sanitize cycle as the water will get too hot. It is also recommended to line dry as often as possible or if you must use a dryer never to turn up past medium, aside from the initial 10-15 in the dryer on hot to seal the seams.



TIPS To Preserve the Life of Your PUL

  • Wash your diapers using recommended routine and detergent. Manufactures recommend routines that they feel is best for their diapers, following their advise is often the easiest was to insure a long like for your diapers. You can find SoftBums washing recommendations HERE.
  • Wash your cloth diapers often. 
  • Do not soak your diapers
  • No Additives as these can be SUPER Harsh on your diapers!
  • Do NOT Ever use the Sanitize cycle on your Washer.  It goes above 140 degrees F and is much too hot
  • Do NOT Dry too high of heat
  • Line dry Shells and never stuff your diaper while hot.
StumbleUpon
Pin It

1 comment:

  1. It is great to know so much about cloth diapers ! I never knew any of this before. Thanks for sharing this information with us. I will be looking forward to more posts

    ReplyDelete